All

All
Product Management
News
Introduction
Enterprise outlets
FAQ
Enterprise Video
Enterprise Atlas

Product showcase

Home page

Product display

Universal terminal block T076

Product Categories：

Industrial connector Terminal block module

公用端配线效率大幅提高普通连线端子台完全代替小型化设计、使配线箱更整洁。

Explore more

Universal Terminal Block T823 Series

Product Categories：

Industrial connector Terminal block module

The efficiency of wiring at the common end is greatly improved; Completely replace the ordinary wiring terminal block Miniaturized design, make the wiring box more tidy

Explore more

Power Distribution Module T077

Product Categories：

Industrial connector Terminal block module

This terminal block is designed for DC control circuits; it converts one DC input into 8 outputs with switching control and self-recovery fuses. The terminal block is equipped with 8-way self-resetting fuses for over-current and short-circuit protection, and 8-way switches to separately control the opening and closing of each circuit. With power display LED, and resettable fuse overcurrent and short-circuit warning LEDs. Equipped with a total power supply lead terminal, can be cascaded to the next terminal block, so that the wiring is more neat and convenient.

Explore more

Input Terminal Block T080/T080-T/T081/T081-T/T834/T085

Product Categories：

Industrial connector Terminal block module

This series of terminal block is a terminal input type jack board, corresponding to a variety of terminal input signal connection; equipped with 8 groups of 3P signal inputs It is equipped with 8 sets of 3P signal inputs, which can be connected to 2-wire or 3-wire signals; it adopts action LED display to show the action status at a glance. T080/T080-P adopts 10P MIL socket to connect with the controller, which can realize the connection of high efficiency and save wiring by cooperating with other products of this series of our company. Highly efficient wiring-saving connection. T081/T081-P uses a 10P terminal block to connect to the controller side for easy remote control. The T085 uses a 10P terminal block to connect to the controller side for easy remote control. T080T/T081-T/T834 is wired with bullet terminals for convenience. T081-T product input +24V with 1A self-recovery fuse, when the load is short-circuited or the current exceeds 1A, the fuse will be automatically disconnected. When the load is short-circuited or the current exceeds 1A, the fuse will be disconnected automatically, and it will be connected within 1 minute after troubleshooting.

Explore more

< 1...8 9 10...12 >