All
- All
- Product Management
- News
- Introduction
- Enterprise outlets
- FAQ
- Enterprise Video
- Enterprise Atlas
X
No data
8 bit output terminal block T082/T082-P/T083/T083-P
Product Classification:
此三款接线板为终端输出型插口板，对应各种终端输出信号连接使用；采用动作LED显示，
动作状态一目了然。
T082/T082-P配有8组2P信号输出口，使用10P MIL连接器与控制器端连接，配合本公司本
系列其它产品，完全实现高效率省配线的连接。
* T083/T083-P配有8组2P信号输出口；使用10P端子台与控制器端连接，方便进行远程控
制使用。
T084配有8位输出信号端子，各端子COM分别独立，方便连接；使用10P MIL连接器与控制
器端连接，配合本公司本系列其它产品，完全实现高效率省配线的连接。
Input/Output Terminal Block T087/T088/T089-1/T211/T212
Product Classification:
T087/T088/T089 This terminal block is an input/output universal terminal block, corresponding to a variety of terminal input/output signals, convenient for remote control; equipped with 8 sets of 3P interface, can be connected to 2-wire/3-wire control signals.
Convenient for remote control; equipped with 8 groups of 3P interface, can be connected to the 2-wire/3-wire control signals: a clear LED action indicators
LED action indicator, display input/output status; indicator color corresponds to the polarity: green - NPN; red - PNP; uplink wiring side with
10P bullhorn cable is conveniently connected to the summarized terminals.
T211/T212 terminal block for input/output universal terminal block, corresponding to a variety of terminal input/output signals, convenient for remote control use.
T211 is equipped with 12 groups of 3P interface, can be connected to 2-wire/3-wire signal; T212 is equipped with 16 groups of 3P interface, can be connected to 2-wire/3-wire signal; T212 is equipped with 16 groups of 3P interface, can be connected to 2-wire/3-wire signal.
T212 is equipped with 16 groups of 3P interfaces, which can be connected to 2-wire/3-wire signals; LED action indicator at a glance, displaying the input and output status; indicator color corresponds to the polarity of: green-NPN; red
Green - NPN; Red - PNP: 20P bullhorn or shrapnel terminals are available on the outlet side of the shrapnel terminals.
Input/Output Terminal Block T884-2TF/T884-3TF/T884-4TF
Product Classification:
This series of terminal block is a terminal input type jack board, corresponding to a variety of terminal input signal connection; equipped with 8 groups of 3P signal input port; access to 2-wire or 3-wire signals; with action LED display, action status can be seen at a glance.
With 8 sets of 3P signal inputs, it can be connected to 2-wire or 3-wire signals; it adopts action LED display to show the action status at a glance.
T884-2TF adopts 18P MIL socket to connect with the controller end, with the company's other products in this series, completely realize
Highly efficient wiring-saving connection.
The T884-3TF uses a 26P terminal block to connect to the controller, making it easy to use for remote control.
The T884-4TF uses a 34P terminal block to connect to the controller side for easy remote control.
Input signal can be switched bi-polar, NPN-green light/PNP-red light.
The loads are self-resilient and rated at 30mA per circuit.
Input/Output Terminal Block T240/T241/T242
Product Classification:
Small size terminal box with transparent protective cover; M3 mounting holes at both ends for mounting and fixing.
Power input P,N with insurance and insurance indicator, insurance disconnection, indicator light; replaceable insurance, can effectively protect the load
The fuse can be replaced to effectively protect the load side equipment devices.
Input/output signals can be bipolar switching, NPN - green light / PNP red light
Input/output wiring using pop-up terminals, screw-free, convenient and time-saving.
after-sales service
Fax:
Follow us
Follow us on WeChat
Official Tiktok
Follow us on WeChat
Copyright ©SHENZHEN SiRON ELECTRICAL CO.,LTD 粤ICP备18138807号