All
- All
- Product Management
- News
- Introduction
- Enterprise outlets
- FAQ
- Enterprise Video
- Enterprise Atlas
X
No data
Cable corresponding to Mitsubishi Q series X212-1/2/3/4/5/6/7/8/9/10
Product Classification:
X212-1针对Q系列I/0模块端口设计;对应T008,T009接线端子台;对应T063转换模块，可以实
现从PLC到信号终端之间的全插接式连接，最大限度的减少接错线发生的概率;
X212-2/X212-3针对QD70P位控模块设计;
X212-4~X212-7针对QD75P位控模块设计;
后六款对应T066,T067位控端子台使用，实现位控模块到驱动器之间的全插接式连接，最大限度
的减少接错线发生的概率。
Cable corresponding to Mitsubishi FX series X213-1/2/3/4/5/6/7
Product Classification:
X213-1/X213-2针对三菱FX系列PLC I/0端口设计;对应T005,T006接线端子台;对应T060转换模
块，可以实现从PLC到信号终端之间的全插接式连接，最大限度的减少接错线发生的概率;
X213-3/X213-4/X213-7针对三菱FX-10GM位控模块设计;
X213-5/X213-6针对三菱FX-20GM位控模块设计;
后五款对应T066,T007位控端子台使用，实现位控模块到驱动器之间的全插接式连接，最大限度的减
少接错线发生的概率
Omron CJ1 series corresponding cable X215系列
Product Classification:
针对OMRON CJ1系列端口设计;
X215-3/X215-4/X215-7/X215-8对应T007接线端子台，均对应T063转换模块，可实现从
PLC到信号终端之间的全插接式连接;
X215-9/X215-10对应T066/T007位控端子台使用,可实现位控模块到驱动器全插接式连接
最大限度的减少接错线发生的概率;
Panasonic FPOR/FP series Corresponding cable X216 series
Product Classification:
X216-1~X216-4 are designed for Panasonic FP0/FP∑ series PLC I/O ports;
X216-1~X216-3 correspond to TN series terminal block modules, which can realize full plug-in connection from PLC to signal terminal, minimizing the probability of wrong wiring.
X216-4 corresponds to Y401 series terminal block module, converting 8-bit output into 2 groups of 4-bit relay control.
X216-5 is designed for the CPU unit of Panasonic FP0 series PLC, classifying the 4 interface signals of CPU into 16-bit input/output two-way signals, corresponding to T005, T006, T022, T032, T060 terminal blocks,
after-sales service
Fax:
Follow us
Follow us on WeChat
Official Tiktok
Follow us on WeChat
Copyright ©SHENZHEN SiRON ELECTRICAL CO.,LTD 粤ICP备18138807号